Chemical composition |
C | 0.15% max. |
Mn | 2.00% |
p | 0.045% max. |
S | 0.030% max. |
Si | 1.00% max. |
Cr | 17.00-19.00% |
Ni | 8.00-10.00% |
N | 0.10% max. |
Cu | ----------- |
Physical properties |
Tensile strength | 100,000 to 180,000 psi |
Yield strength | 50,000 to 150,000 psi |
Elongation | 55 to 60% |
Modulus of elasticity | 29,000,000 psi |
Density | 0.286 lbs/cubic inch |
Application areas:
Widely used in auto parts, aviation, aerospace, hardware tools, chemical industry.
As follows: crafts, bearings, pulleys, medical equipment, then the column, electrical
appliances.
Features:
Belong to the austenitic steel, close to AISI 304, but AISI 302 higher hardness,
HRC ≤ 28. Good rust and corrosion protection.
Tell us your balls requirements, the offer will be send you at the first time.
* According to the AISI standard |
---|